Building or Place
NPS Code
Address
Number of Samples

Tilia platyphylla

Three sections of wood: transverse, radial, tangential.

0

Acer platanoides

Three sections of wood: transverse, radial, and tangential.

0

Limestone samples from Anne Brackin’s previous work. Some samples are loose.

0

Photographic film and thin sections of sandstone coupons

0

Sorbus Aucuparia

Three sections of wood: transverse, radial, tangential.

0

Quercus robur

Three sections of wood: transverse, radial, tangential.

0

Pyrus communis

Three sections of wood: transverse, radial, tangential.

0

Pinus silvestris

Three sections of wood: transverse, radial, tangential.

0

Platanus orientalis

Three sections of wood: transverse, radial, tangential.

0

Prunus domestica

Three sections of wood: transverse, radial, tangential.

0

Populus alba

Three sections of wood: transverse, radial, tangential.

0

From Lynn (2019):

SRHGH1 is a soft red brick that came from the Hermann-Grimma house in the French Quarter of New Orleans. From initial observation, the red color seems to indicate that the clay came from the Mississippi River. The brick does not have a brickmaker’s stamp, although the age of the house dates the brick to the 1830s. This sample is a regular brick, has sharp edges, and is struck from header to header across the bedding face. The strike marks on the brick indicate that it was struck with a wooden striker, which is consistent with the period. The lack of sand in the surface indicates that water was used as a molding lubricant. Given these characteristics, the brick appears to have been hand-made using the soft mud method.

0

SRHGH1 is a soft red brick that came from the Hermann-Grimma house in the French Quarter of New Orleans. From initial observation, the red color seems to indicate that the clay came from the Mississippi River. The brick does not have a brickmaker’s

0

From Lynch (2009): “From initial observation, the red color seems to indicate that the clay came from the Mississippi River. The brick is stamped “BARRE. F,” although documentary research failed to find more about this brickmaker. This sample is a fire brick, has sharp edges, and is struck from header to header across the bedding face. The strike marks on the brick indicate that it was cut with a wire. The lack of sand in the surface indicates that oil was used as a molding lubricant. Given these characteristics, the brick appears to have been produced by extrusion through a type of soft mud machine. However, it is relatively heavier than other bricks in the soft red group and may have been repressed. SRGS1 is also cracked and deformed.”

0

From Lynch (2009): “From initial observation, the red color seems to indicate that the clay came from the Mississippi River. The brick does not have a brickmaker’s stamp, although it is likely that the brick dates to the 1820s. This sample is a regular brick, has rough edges, and is struck from stretcher to stretcher across the bedding face. The strike marks on the brick indicate that it was struck with a wooden striker, which is consistent with the period. The 21 lack of sand in the surface indicates that water was used as a molding lubricant. Given these characteristics, the brick appears to have been hand-moulded using the soft mud method.”

0

From Lynch (2009): “From initial observation, the red color seems to indicate that the clay came from the Mississippi River. The brick does not have a brickmaker’s stamp, although it came out of the roof of Pelican Mutual Benevolent Society Tomb. This sample is a regular brick and is struck across the bedding face. It is unclear which direction the brickmaker struck the brick, but it was done with a wire. This brick appears to have been extruded, and the lack of sand in the surface indicates that oil was used as a molding lubricant. Given these characteristics, the brick appears to have been produced by extrusion using the stiff-mud machine and repressed.”

0
« Previous PageNext Page »